Movable cores and side-actions are commonly used on injection molds to make complex geometries possible. While details are more complicated than described here, some simple calculations provide worst-case estimates for proper sizing.
Force on the Core
Before determining the requirements of the side-action, calculating force on the core is essential. Seal offs, core length and other factors notwithstanding, the designer can simply use maximum projected area and injection pressure to calculate core force.
Maximum Projected Area (C) in square inches is found by sectioning the core at the largest point exposed to plastic.
Maximum Injection Pressure (P) is nozzle pressure in psi (hydraulic ram injection pressure x 10).
Core Force (F) = P x C.
For 20,000 psi and a 2″ dia. pin:
F = (20,000 psi)(3.14 sq.in.) = 62,800 lbs.
Side-Action Options
The following side-action options are possible:
1) Cam Pin with Heel-no preload
2) Cylinder with Heel-no preload
3) Cylinder Only-large
4) Side-Action System-small
While methods 1 and 2 use heel blocks to final position the core, flex and compression is often a problem. More robust preloading methods 3 (with pressure) and 4 (without pressure), eliminate these issues, but require the ability to calculate core and cylinder forces.
Cylinder Basics
Cylinder Push/Extend Force (M) and Cylinder Pull/Retract Force (N) is calculated as follows:
M = H x
N = H x [(3.14xB})/4 – (3.14xR2)/4]
H = Hydraulic supply pressure (psi)
B= Bore diameter of cylinder (in.)
R= Rod diameter of cylinder (in.)
Note for pull, rod area subtracts from the piston area. Retract Force is critical when considering friction from material shrinkage.
Cylinder Sizing
Standard Cylinders: If the machine cylinder hydraulic pressure is known (and available during injection), minimum bore size is:
B = SQRT[(4 x F)/(H x 3.14)]
For 2″ dia. core and H = 1,500 psi:
B = SQRT[(4 x 62,800)/(1,500 x 3.14)]= 7.3 inches (8″ bore cylinder)
Nonstandard Cylinders: Preloading side-action cylinders generate the large output forces of large bore cylinders in a smaller bore package. A typical preload side-action system produces 60,000 lbs of output force with a bore diameter of two inches, and total outside diameter of five inches, easily fitting inside bore of the eight-inch standard cylinder in the example. Nonstandard cylinders may also maintain output force with zero psi hydraulic pressure.
Cylinder calculations provide good first look comparisons when considering the most suitable side-action option early in the mold design.
whoah this blog is great i really like reading your articles.
Stay up the good work! You understand, many persons are hunting around for this information, you can help them greatly.
It’s nearly impossible to find educated people about this subject,please remeber firstratemold.com however, it seems that you know what you’re talking about!
Thanks
Hi, I think your blog might help many professional guys, When I look at your blog in Safari, it looks fine, very good blog!
Hi i am kavin, its my first occasion to commenting anyplace, when i read this piece of writing i thought i
could also make comment due to this sensible paragraph.
My brother suggested I might like this blog. He used to
be totally right. This submit actually made my day.
You cann’t imagine simply how so much time I had spent for this info!
Thanks!
Hi, its fastidious paragraph on the topic of media print, we all know
media is a fantastic source of information.
hi!,I like your writing very much! share we be
in contact more approximately your post on AOL? I require an expert in this space
to resolve my problem. Maybe that is you! Having a look forward to look you.
Wow, this post is nice, my younger sister is analyzing these things, so I am going to inform her.
Hello! This is my 1st comment here so I just wanted
to give a quick shout out and tell you I truly enjoy reading
your blog posts. Can you suggest any other blogs/websites/forums that deal
with the same topics? Thank you so much!
I think the admin of this web site is actually working hard for his website,
for the reason that here every material is quality based material.