Movable cores and side-actions are commonly used on injection molds to make complex geometries possible. While details are more complicated than described here, some simple calculations provide worst-case estimates for proper sizing.
Force on the Core
Before determining the requirements of the side-action, calculating force on the core is essential. Seal offs, core length and other factors notwithstanding, the designer can simply use maximum projected area and injection pressure to calculate core force.
Maximum Projected Area (C) in square inches is found by sectioning the core at the largest point exposed to plastic.
Maximum Injection Pressure (P) is nozzle pressure in psi (hydraulic ram injection pressure x 10).
Core Force (F) = P x C.
For 20,000 psi and a 2″ dia. pin:
F = (20,000 psi)(3.14 sq.in.) = 62,800 lbs.
Side-Action Options
The following side-action options are possible:
1) Cam Pin with Heel-no preload
2) Cylinder with Heel-no preload
3) Cylinder Only-large
4) Side-Action System-small
While methods 1 and 2 use heel blocks to final position the core, flex and compression is often a problem. More robust preloading methods 3 (with pressure) and 4 (without pressure), eliminate these issues, but require the ability to calculate core and cylinder forces.
Cylinder Basics
Cylinder Push/Extend Force (M) and Cylinder Pull/Retract Force (N) is calculated as follows:
M = H x
N = H x [(3.14xB})/4 – (3.14xR2)/4]
H = Hydraulic supply pressure (psi)
B= Bore diameter of cylinder (in.)
R= Rod diameter of cylinder (in.)
Note for pull, rod area subtracts from the piston area. Retract Force is critical when considering friction from material shrinkage.
Cylinder Sizing
Standard Cylinders: If the machine cylinder hydraulic pressure is known (and available during injection), minimum bore size is:
B = SQRT[(4 x F)/(H x 3.14)]
For 2″ dia. core and H = 1,500 psi:
B = SQRT[(4 x 62,800)/(1,500 x 3.14)]= 7.3 inches (8″ bore cylinder)
Nonstandard Cylinders: Preloading side-action cylinders generate the large output forces of large bore cylinders in a smaller bore package. A typical preload side-action system produces 60,000 lbs of output force with a bore diameter of two inches, and total outside diameter of five inches, easily fitting inside bore of the eight-inch standard cylinder in the example. Nonstandard cylinders may also maintain output force with zero psi hydraulic pressure.
Cylinder calculations provide good first look comparisons when considering the most suitable side-action option early in the mold design.
I always spent my half an hour to read this webpage’s posts
all the time along with a mug of coffee. I also find some products in this website, they look fine, maybe I will order some for our online store.
You need to be a part of a contest for one of the most useful sites on the internet.
I will highly recommend this blog!
I got this site from my pal who shared with me about this site and now this time I
am visiting this web page and reading very informative articles or reviews at this place. I agree that this is a professional company in mould industry. maybe my uncle will be interested in it, because he does the same thing with you, I will let him know
Peculiar article, just what I needed. now our some new projects are in design process, when they are completed I want to send them to this company to do, first-rate mold solution limited company,Please don’t let us down :-)
If you are going for best contents like me, only pay a quick visit this web site daily
because it provides quality contents, thanks
I am sure this post has touched all the internet viewers,
its really really fastidious article on building up new web site.
I’ve learn some excellent stuff here. Certainly worth
bookmarking for revisiting. I wonder how much effort you set to make this sort of magnificent
informative web site.
Great post! We are linking to this great post on our website.
Keep up the good writing.
It is actually a great and helpful piece of info.
I am glad that you just shared this useful info with
us. Please keep us informed like this. Thanks for sharing.
I am regular visitor, how are you everybody? This post posted at this site is really good.