the mold surface roughness is a very important technical parameter in mold making, because the surface finish of the molding area directly affects the surface roughness of the plastic part. A range of polishing tools is used to meet a different surface finish requirement. The society of plastics industry classifies mold surface finishes into 12 grades in 4 categories:
A—mirror image, it is typically polished with diamond paste, it’s surface finish Ra is 0—0.0001mm, applicable for plastic parts whose surface should have high luster. In general, mirror image is further classified into A1, A2, and A3.
B—smooth, it is usually polished with sand paper. It’s surface finish is between 0.0001—0.0002mm, applicable for plastic parts with a typical surface requirement. This category can be further classified into B1, B2, and B3.
C—Semi-smooth.it is polished with whetstone. It’s surface finish is between 0.0002—0.0008mm, applicable for plastic parts without a specific surface finish requirement. This category is also further classified into C1, C2, and C3.
D—General. Sand blasting is commonly used. This category is also further classified into D1, D2, and D3.
your encouragement is very important for us!
Εxϲhellent goodѕ from you, man. I haѵe taqke note youг
stuff previous to and you’re simply extremely wonderful.
I actսally like what you havе received right here, ceгtainly like what you
are sаying and the way during which you say it.
You’re making it enjoyaƄle and you continue to take care of to stay it smart.
I can’t wait to read far moe from you. That is really
a terrific site.
could you tell us which industry you are working in?
continuously i used to read smaller content that as well clear their motive, and that is also happening with this piece of writing
which I am reading now.
thanks for your comment! actually we have contact information at every page, you can shoot an Email to [email protected] we are waiting for your great suggestions!
It is the best time to make a few plans for the longer term and it is time
to be happy. I’ve read this put up and if I may I want to suggest you some interesting issues or tips.
Perhaps you can write next articles relating to this article.
I want to read even more things about it!
Does your site have a contact page? I’m having a tough time
locating it but, I’d like to shoot you an email.
I’ve got some suggestions for your blog you might be interested in hearing.
Either way, great blog and I look forward to seeing it grow over time.
thanks very much for you visit our website! you are walcome to be here any time
I’m amazed, I have to admit. Rarely do I come across a blog that’s
both educative and interesting, and let me tell you, you’ve hit the nail on the head.
The problem is something which not enough people are speaking intelligently
about. I am very happy that I stumbled across this in my hunt for something regarding this.
could you tell us which industry you are in？