the mold surface roughness is a very important technical parameter in mold making, because the surface finish of the molding area directly affects the surface roughness of the plastic part. A range of polishing tools is used to meet a different surface finish requirement. The society of plastics industry classifies mold surface finishes into 12 grades in 4 categories:
A—mirror image, it is typically polished with diamond paste, it’s surface finish Ra is 0—0.0001mm, applicable for plastic parts whose surface should have high luster. In general, mirror image is further classified into A1, A2, and A3.
B—smooth, it is usually polished with sand paper. It’s surface finish is between 0.0001—0.0002mm, applicable for plastic parts with a typical surface requirement. This category can be further classified into B1, B2, and B3.
C—Semi-smooth.it is polished with whetstone. It’s surface finish is between 0.0002—0.0008mm, applicable for plastic parts without a specific surface finish requirement. This category is also further classified into C1, C2, and C3.
D—General. Sand blasting is commonly used. This category is also further classified into D1, D2, and D3.
This is really attention-grabbing, You are an excessively
skilled blogger. I have joined your rss feed and
stay up for looking for extra of your wonderful post. Additionally, I have
shared your website in my social networks
thanks for you are interested in our website
Hi to every one, it’s in fact a good for me to pay
a quick visit this web site, it consists of useful Information.
you are right! please go ahead!
First of all I want to say terrific blog! I had a quick question which
I’d like to ask if you do not mind. I was interested to know how you center yourself and clear
your head before writing. I have had difficulty clearing my mind in getting my thoughts out.
I truly do take pleasure in writing but it just seems like the first 10 to 15 minutes are wasted simply just trying to figure out how
to begin. Any suggestions or tips? Kudos!
maybe that is a great ideal! please go ahead:-)
Hi, i tɦink that і saw you visited my site thսs i came tto “return the favor”.I
am attempting tο find tɦings tߋ enhance my website!ӏ suppose its ooƙ tto uѕe ѕome of your ideas!!
welcome to visit our website and we hope you share it with more and more peoples
Ԝhat’s up everybody, here every one is sharing such experience, theгefore it’s ɡood
to reɑd this weblog, and I used to pay a quick visit this weblog
eѵery day.
thanks for you visit our website, we will keep it up!
Great weblog right here! Additionally your site a lot up very fast!
What host are you the usage of? Can I am getting your affiliate
link for your host? I desire my site loaded up as quickly as yours lol
thanks for you visit our website. as for the problem you mention, I think that your local professional website comany could meet your requirement
This is the perfect site for everyone who wants to understand this topic.
You realize so much its almost tough to argue with you
(not that I personally will need to…HaHa).
You definitely put a new spin on a subject that’s been discussed for decades.
Great stuff, just excellent!