the mold surface roughness is a very important technical parameter in mold making, because the surface finish of the molding area directly affects the surface roughness of the plastic part. A range of polishing tools is used to meet a different surface finish requirement. The society of plastics industry classifies mold surface finishes into 12 grades in 4 categories:
A—mirror image, it is typically polished with diamond paste, it’s surface finish Ra is 0—0.0001mm, applicable for plastic parts whose surface should have high luster. In general, mirror image is further classified into A1, A2, and A3.
B—smooth, it is usually polished with sand paper. It’s surface finish is between 0.0001—0.0002mm, applicable for plastic parts with a typical surface requirement. This category can be further classified into B1, B2, and B3.
C—Semi-smooth.it is polished with whetstone. It’s surface finish is between 0.0002—0.0008mm, applicable for plastic parts without a specific surface finish requirement. This category is also further classified into C1, C2, and C3.
D—General. Sand blasting is commonly used. This category is also further classified into D1, D2, and D3.
Thanks for your compliment
I am not positive the place you’re getting
your information, however great topic. I needs to spend a while studying much more or working out more.
Thank you for great info I was in search of this info for my mission.
thanks for you love our blog, actually we have a professional team to run it, anyway, if you love it, just do it, that is it.
I love your blog.. very nice colors & theme. Did you design this website yourself or did you hire someone to do it for you?
Plz answer back as I’m looking to create my own blog and would
like to find out where u got this from. kudos
thanks so much for your comment, as for your requirement, we will consider carefully and make sure to do it better in the next time
I do trust all of the ideas you have offered for your post.
They are really convincing and will certainly work. Still, the posts are very quick for starters.
May you please prolong them a little from next time? Thanks for the post.
Nice post. I was checking continuously this blog and I am impressed!
Very useful information specifically the last part :) I care for such info a lot.
I was seeking this particular info for a very long time.
Thank you and best of luck.
thanks so much! your commment is the best reward for us!
Ahaa, its good discussion regarding this paragraph at
this place at this web site, I have read all that, so now me also
commenting at this place.
thanks for reading! do you have any suggestion?
Hi there, its good article on the topic of media print, we
all be aware of media is a wonderful source of data.
Yes! we think so :-）
Very nice article, exactly what I needed.
we are gald to hear that! :-)