the mold surface roughness is a very important technical parameter in mold making, because the surface finish of the molding area directly affects the surface roughness of the plastic part. A range of polishing tools is used to meet a different surface finish requirement. The society of plastics industry classifies mold surface finishes into 12 grades in 4 categories:
A—mirror image, it is typically polished with diamond paste, it’s surface finish Ra is 0—0.0001mm, applicable for plastic parts whose surface should have high luster. In general, mirror image is further classified into A1, A2, and A3.
B—smooth, it is usually polished with sand paper. It’s surface finish is between 0.0001—0.0002mm, applicable for plastic parts with a typical surface requirement. This category can be further classified into B1, B2, and B3.
C—Semi-smooth.it is polished with whetstone. It’s surface finish is between 0.0002—0.0008mm, applicable for plastic parts without a specific surface finish requirement. This category is also further classified into C1, C2, and C3.
D—General. Sand blasting is commonly used. This category is also further classified into D1, D2, and D3.
Have you ever considered about including a little bit more than just your
articles? I mean, what you say is valuable and all. Nevertheless think about if you added some great images or videos to give your
posts more, “pop”! Your content is excellent but with images and video clips, this site
could definitely be one of the best in its field. Wonderful blog!
we think those are good news for us! please go ahead!
I know this web site offers quality depending posts and additional information, is there any other web
page which gives such data in quality?
I Ԁοn’t even ҟnow how I ended up hеre, Ƅut I tthought tɦis post ԝaѕ great.
I do not know who yoս are bսt сertainly yoս’re going to a famous blogger if ʏou aren’t already ;) Cheers!
thanks for your encouragement! we will keep it up
Hey there! Do you use Twitter? I’d like to follow you if that would be
ok. I’m undoubtedly enjoying your blog and look forward to new updates.
yes! we have our own Twitter, please add it, also you can share our blog in your Twitter if it is possible
I think the admin of this site is truly working hard for his web page, since here every material is quality based information.
yes! you are right! it is too hard! thanks for your understanding
I am not surе where yoս are getting your info,
but goοɗ topic. ӏ needs to spend somе time learning mߋre or understanding more.
Thɑnks for wonderful info I waѕ loߋking fοr this infrmation for my
mission.
the most important part is that you are interested in those industry informations and really help you, that is our purpose, I want to say our team really love our mold industry
Ϝine way of telling, and fastidious post to obtain facts about my presentation topic, which i am going to
convey in institution of higher education.
at first, thanks so much for you visit our website, as for some overlapping issues in IE, maybe because your IE version is too low, please try it in higher IE version, IE8.0 or IE9.0 would be better
Hello, I do believe your website might be having web browser compatibility
problems. Whenever I look at your site in Safari, it looks fine however when opening in I.E., it has
some overlapping issues. I simply wanted to give you a quick heads up!
Aside from that, fantastic blog!