The evolution and revolution of technology has made mold builders more sophisticated and resourceful; and, more so now than ever before—as the trying economy and outsourcing take their toll—mold builders are seeking out value-added services and competitive advantages. Sensor technology is one such area.

In regards to cavity pressure, mold builders are starting to incorporate sensor technology as never before. It wasn’t too long ago that cavity pressure sensors were seen as just another request from the customer, but today they are becoming a valuable tool in providing a robust product for the customer.

Cavity pressure sensors are not a new technology in the realm of injection molding. They have been around since the sixties. They come in several different types, shapes and sizes—from indirect sensors, which are installed behind an ejector pin to direct sensors that are mounted flush with the cavity. The appropriate cavity pressure transducer will be dictated by the application. With the help of new sensor technology and solid modeling, sensors have gone from being delicate and difficult to install to robust and straightforward.

However, it has only been in the last 10 to 15 years that cavity pressure has been embraced by injection molders. For the mold builders, it has only been in the last five years. The wealth of information that has been realized and applied to mold design and manufacturing, is growing in the mold building community.

By installing cavity pressure sensors in molds, mold builders gain precise and abundant information as to how the tool is performing under rigorous processing conditions. An example would be testing for cavity balance at multiple fill speeds to see if different shear rates change the balance and to what effect.

Cavity pressure data also can provide information on cooling and shrinkage. What effects do different melt and mold temperatures have on the outcome of the part? All of which can be used to provide the mold builder with information to improve the mold and its ability to provide a quality part.

So, you’re thinking, “I already get that information with flow simulation software,” right? Have you ever compared cavity pressure data to flow simulation data?

Today mold builders have become more than just steel cutters. They have teams of engineers, designers and even processors. Process training for mold builders and tooling engineers has never been more popular. Process training coupled with cavity pressure data provides the mold builder with a wealth of value and information that can be provided to the customer.

There are more than CNC machines humming away; now there are molding machines as well. Cavity pressure sensors are being installed in new programs with the help of data acquisition to provide information as to the robustness of the tool on which the customer has just spent thousands of dollars. Trialing the molds in house allows mold builders to accomplish rework faster, and with data gained with cavity pressure, pinpoint particular areas for improvement.

With the aid of solid modeling, cavity pressure sensor models can be e-mailed or downloaded by the mold builder and designer and then dropped into the initial design instead of as an afterthought. This makes the installation and application more robust and helps eliminate the return of a tool due to the sensor being installed improperly. It also allows the mold builder to identify potential problems, such as water lines that may be blocking the installation.

Being able to identify these in the design stage allows ejector pins to be relocated or added to allow for a more robust installation or to select a more appropriate sensor for the application. Designing the installation on the front end is always cheaper then reworking the tool.