the mold surface roughness is a very important technical parameter in mold making, because the surface finish of the molding area directly affects the surface roughness of the plastic part. A range of polishing tools is used to meet a different surface finish requirement. The society of plastics industry classifies mold surface finishes into 12 grades in 4 categories:
A—mirror image, it is typically polished with diamond paste, it’s surface finish Ra is 0—0.0001mm, applicable for plastic parts whose surface should have high luster. In general, mirror image is further classified into A1, A2, and A3.
B—smooth, it is usually polished with sand paper. It’s surface finish is between 0.0001—0.0002mm, applicable for plastic parts with a typical surface requirement. This category can be further classified into B1, B2, and B3.
C—Semi-smooth.it is polished with whetstone. It’s surface finish is between 0.0002—0.0008mm, applicable for plastic parts without a specific surface finish requirement. This category is also further classified into C1, C2, and C3.
D—General. Sand blasting is commonly used. This category is also further classified into D1, D2, and D3.
I have read so many posts on the topic of the blogger lovers, except this article, it is truly a fastidious post, keep it up.
Gгeat article! Ԝe will be linking to this great article on οur site.
Κeep uρ the ǥreat writing.
It’s amazing to go to see this site and reading the views of all colleagues
about this post, while I am also ken of getting
experience.
Hello there, I found your site by means of Google whilst searching for a similar subject,
your website got here up, it appears to be like good. I’ve bookmarked it in my
google bookmarks.
Hello there, simply turned into alert to your weblog through Google,
and found that it’s really informative. I am going to be
careful for brussels. I will appreciate if you happen to continue this in future.
Lots of folks might be benefited out of your writing.
Cheers!
great blog! I think many mold engineers will love this website, and it is a good forum to discuss professional issues
whoah this blog is excellent i like reading your articles.
Keep up the good work! You realize, many
people are hunting around for this info, you can aid them greatly.
Post writing is also a excitement, if you be familiar with afterward you can write otherwise
it is complicated to write.
Great post. I used to be checking continuously this blog and I
am impressed! Very useful information particularly the closing part :) I maintain such info a lot.
I was looking for this certain info for a long time.
Thanks and good luck.
I am so excited to find this website, I will recommend this company to my brother who works in a mold company as a senior mold project engineer. maybe they can build a business relationship in the future.
There is certainly a great deal to learn about this issue.
I like all the points you have made.