the mold surface roughness is a very important technical parameter in mold making, because the surface finish of the molding area directly affects the surface roughness of the plastic part. A range of polishing tools is used to meet a different surface finish requirement. The society of plastics industry classifies mold surface finishes into 12 grades in 4 categories:
A—mirror image, it is typically polished with diamond paste, it’s surface finish Ra is 0—0.0001mm, applicable for plastic parts whose surface should have high luster. In general, mirror image is further classified into A1, A2, and A3.
B—smooth, it is usually polished with sand paper. It’s surface finish is between 0.0001—0.0002mm, applicable for plastic parts with a typical surface requirement. This category can be further classified into B1, B2, and B3.
C—Semi-smooth.it is polished with whetstone. It’s surface finish is between 0.0002—0.0008mm, applicable for plastic parts without a specific surface finish requirement. This category is also further classified into C1, C2, and C3.
D—General. Sand blasting is commonly used. This category is also further classified into D1, D2, and D3.
Hey there! Do you use Twitter? I’d like to follow you if that would be ok.
I’m undoubtedly enjoying your blog and look forward to new posts.
yes! we have a Twitter account, if you have one, please let us know
Asking questions are in fact good thing if you are not understanding something entirely, except this
post gives good understanding even.
Hola! I’ve been reading your blog for some time now and finally got the courage to go ahead and give you a shout
out from Humble Tx! Just wanted to say keep up
the great job!
My family members all the time say that I am killing my time here at net, however I know
I am getting knowledge all the time by reading
thes good posts.
Hi there are using WordPress for your blog platform? I’m new to the blog world but I’m trying to get started and set up my own. Do you
require any html coding knowledge to make your own blog? Any help would
be really appreciated!
yes! we are using WordPress for our platform.. as for HTML coding knowledge, it depends on your website requirement, but Basic HTML knowledge is required
could you tell us which industry you are in?
Great weblog here! Additionally your website so much
up fast! What web host are you using? Can I get your associate link in your host?
I want my website loaded up as fast as yours lol
Its like you learn my thoughts! You appear to know a lot about
this, such as you wrote the guide in it or something. I think that you just can do
with some p.c. to force the message home a bit, however other than that,
that is wonderful blog. An excellent read.
I will certainly be back.
That is really interesting, You are an excessively professional blogger.
I’ve joined your feed and sit up for seeking more
of your excellent post. Also, I’ve shared your website in my social networks
Hi all, here every one is sharing such know-how, so it’s nice to read this web site, and I used to
visit this website daily.