What is Ceramic Injection Moulding (CIM)?
The CIM process begins with very fine ceramic powders. Using sophisticated mixing technology the powders are compounded with thermoplastic binders to produce a homogeneous pelletised feedstock. […]
The cracking analysis in Injection products
Injection products processing products in cracking analysis of the causes and solutions Cracking, including parts of filamentous surface cracks, micro-, white top, and cracking due to mold parts sticky, viscous flow mode caused by trauma or crisis, according to the release at the time cracking and cracking applications. There are several reasons: […]
Introduction to CNC lathes
CNC Lathe and turningCNC lathes are rapidly replacing the older production lathes (multispindle, etc) due to their ease of setting and operation. […]
Introduction to CNC Milling machine
A milling machine is a machine tool used for the complex shaping of metal and other solid materials. Its basic form is that of a rotating cutter or endmill which rotates about the spindle axis (similar to a drill), and a movable table to which the workpiece is affixed. […]
Introduction to Turning
Turning is a form of machining, a material removal process, which is used to create rotational parts by cutting away unwanted material. […]
Introduction to Milling
Milling is the most common form of machining, a material removal process, which can create a variety of features on a part by cutting away the unwanted material. The milling process requires a milling machine, workpiece, fixture, and cutter. […]
EDM Machining Process & Techniques
A machining method typically used for hard metals, Electrical Discharge Machining (commonly known as “EDM Machining”) makes it possible to work with metals for which traditional machining techniques are ineffective. An important point to remember with EDM Machining is that it will only work with materials that are electrically conductive. […]
CNC Machining Introduction
CNC machining is short for computer numerical control machining. It refers to a computer controller that reads code and instructions and drives a machining tool in order to make a product according to specific requirements. Imagine a robot that can make several different products based on a specific set of instructions given to it. [...]
Size limitations in The Rapid Injection Molding process
The Rapid Injection Molding process can produce parts within certain limits of size and volume.The maximum part size depends upon part geometry and material, but here are approximate guidelines: […]
The application of gas-assisted molding technology in molding products
A) Part Strength and RigidityStructural integrity and part stiffness are major advantages for conversion to Gas Assist. Flat, relatively thin wall parts can be made rigid with the addition of a gas channel or channels where allowable in the part, with accommodation for proper filling of the cavity. […]