Mold cleaning is a process where major maintenance bottlenecks often occur because molds are pulled faster than they can be cleaned and made production-ready. I have visited plants where molds waiting to be cleaned line hallways and toolrooms, taking up valuable bench space.
Many times, in order to meet production demands, molds get reset dirty or the cleaning process is rushed, which subjects tooling to more damage through hurried handling. The question is asked, “Can we run it the way it is, or does it really need to be cleaned?” In companies where firefighting is the accepted culture, the mold will be reset and started; if all the parts come out clean, it runs. Once this happens a few times, management comes to assume that molds need to be cleaned only when the residue level is bad enough to migrate out onto the part, or until the mold locks (galls) up.
Some shops handle cleaning chores by enlisting non-skilled employees or toolroom apprentices to wash tooling and plates as quickly as the repair technician can take them apart. This practice works, unless the product has critical flash, dimensional or aesthetic specifications, or the mold has a history of maintenance, reliability or quality issues. It is difficult for the repair technician to accurate troubleshoot mold and part defects when all the track marks are washed off from the tooling and plates.
Why clean injection molds?
Injection molding is a widely used process in mass production, therefore it is essential that the process is flawless in order to avoid unnecessary costs incurred from having to redo results or repair and or replace equipment and to ensure the quality of a large number of pieces.
Proper lubrication of the mold extraction mechanisms or mold cooling channels free from limescale and rust accumulations, are elements to pay attention to in the maintenance of injection molding machines. But the perfect cleanliness of the mould figures is perhaps the most important factor to ensure the highest quality of production.
It’s easy for a small imperfection in the surface of the mold, in contact with the molten polymer material, to create a defect in the final part once it has cooled. For this reason it is essential to rely on cleaning systems that not only carefully remove the residues that can be deposited on the mould figures (especially the smallest and richest ones), but also in order to prevent any damage to the mold.
The residues to be removed are usually deposits of release agents and lubricating oils – used to allow the detachment of the artifacts from the walls of the molds and the correct sliding of the mobile part of the mould. In addition, it is also possible that the molds must be cleaned of residues left by the gases that are created in the presence of pressure and high temperatures
How to clean injection molds
In order to avoid any damage to the surface of the mold, operations such as sandblasting, the small “clothespins” used to clean the surface of the mould or the use of aggressive and potentially corrosive substances are absolutely to be avoided as they could be counterproductive.
Even resorting to manual washing processes with rags and solvents may not be the best solution, as it could lead to unsatisfactory cleaning standards, especially in the case of moulds with complex geometries and small figures.
Finally, given the considerable impact of a mold on the quality of mass production, it would be advisable to proceed with a standardized washing process that always uses the same products: in this way it will be possible to minimize the possible variability of the production parts due to the level of cleanliness of the mold, eliminating the human factor from the equation.
Automatic parts washers that use gentle water-based detergents are almost always the best choice for washing injection molds.
In the case of complex moulds and with very small parts it may be necessary to resort to ultrasonic cleaning technology that allows you to reach every millimetre of the mold surface effectively. Ultrasonic cleaners have special features that generate micro-explosions in the washing fluid that the mold is immersed in. These in turn create friction that enhances the cleaning effect of the fluid, even when dealing with fine surface details.
For simpler moulds, however, a rotating basket parts washing machine can be sufficient to ensure standardization, effectiveness and delicacy of washing.
The only exceptions are hot chamber molds and mirror-polished molds.
Injection molding equipment is the backbone of many manufacturing operations, enabling the production of a wide range of plastic products efficiently and cost-effectively. However, like any machinery, injection molding equipment requires regular maintenance to ensure optimal performance, longevity, and safety. In this blog post, we’ll explore some essential maintenance tips to keep your injection molding equipment running smoothly and prevent costly downtime.
1. Regular Inspection
Regular inspections are key to identifying potential issues early on and preventing them from escalating into more significant problems. Schedule routine inspections of your injection molding equipment to check for signs of wear and tear, loose connections, leaks, and other issues that may affect performance. Pay close attention to critical components such as screws, barrels, nozzles, and hydraulic systems.
2. Lubrication
Proper lubrication is essential for ensuring smooth operation and preventing friction-related damage. Refer to the manufacturer’s guidelines to determine the appropriate lubricants and lubrication intervals for different components of your injection molding equipment. Over-lubrication can be as detrimental as under-lubrication, so follow the recommended guidelines carefully to avoid excess buildup and contamination.
3. Cleanliness
Maintaining cleanliness is crucial for preventing contamination and ensuring the quality of molded products. Regularly clean the surfaces, molds, and components of your injection molding equipment using suitable cleaning agents and techniques. Pay particular attention to areas prone to buildup, such as cooling channels, ejector pins, and vents. Implementing a comprehensive cleaning regimen will help prolong the lifespan of your equipment and minimize the risk of defects.
4. Temperature Control
Maintaining precise temperature control is essential for achieving consistent molding results and preventing thermal degradation of materials. Calibrate and monitor the temperature settings of heating elements, molds, and cooling systems regularly to ensure they are operating within the specified range. Periodically inspect and clean heating elements, thermocouples, and temperature sensors to maintain accuracy and reliability.
5. Replace Worn Components
Over time, components of injection molding equipment may wear out or become damaged due to prolonged use. Keep an inventory of spare parts and regularly replace worn or damaged components to prevent unexpected breakdowns and downtime. Components such as seals, O-rings, nozzles, and heating elements should be replaced as part of routine maintenance to ensure optimal performance and reliability.
6. Operator Training
Invest in comprehensive training programs for operators and maintenance personnel to ensure they understand the proper operation and maintenance procedures for injection molding equipment. Empower your team with the knowledge and skills they need to identify potential issues, perform routine maintenance tasks, and troubleshoot common problems effectively. Regular training sessions will help instill a culture of safety, efficiency, and accountability within your organization.
By following these maintenance tips diligently, you can extend the lifespan of your injection molding equipment, minimize downtime, and maximize productivity. Remember that proactive maintenance is always more cost-effective than reactive repairs, so prioritize regular inspections and preventive maintenance tasks. With proper care and attention, your injection molding equipment will continue to deliver high-quality results and contribute to the success of your manufacturing operations.