Thermotech is committed to finding improved methods of meeting our customers ever changing needs and ongoing cost pressures. As part of this commitment, we have a defined process for the development of new technologies known as TIP (Thermotech Innovation Process).
One of the TIP programs that is in the final stages of development is hermetic seal insert molding. The goal of the program is to develop the necessary technology to insert mold parts that do not have a leak path along the metal to plastic interface. In conventional insert molding, no bond exists along this interface.
This inherent leak path can create failures of electronic components for various industries including: automotive, electrical, appliance, and aerospace. An example of an application for this technology would be bulkhead connectors, where the customer is trying to seal the environment on one side of the bulkhead so that neither gases nor liquids can migrate to the other side.
The current, most common solution to this leak path issue is some form of secondary operation involving potting, impregnation, molded secondary seals, or in special cases, glass bonding. Potting and impregnation are intermediate in cost. However, potting is a very messy process and impregnation usually requires outsourcing to a qualified vendor. Secondary molded seals are relatively inexpensive but do not provide true hermeticity through the bulkhead. Glass bonding techniques are very expensive.
Thermotech is in development with a solution that creates a hermetic seal through material modification. Because the most common bulkhead materials are nylon, polyesters (PBT and PET), and polyphenylene sulfide (PPS), we have chosen these resins for our initial developments. Copper and nickel were selected as our base development metals.
The amount of hermeticity required varies by application. Many applications are satisfied at leak rates less than 1X10E-5 standard cubic centimeters/ second (SCCS) of helium. We have already met this specification with both polyesters and PPS while we continue developing formulations for nylon. In fact, we have achieved leak rates less than 1X10E-9 SCCS for PPS using both copper and nickel-plated inserts.
Thermotech is continuing to evaluate samples under varying environmental and chemical conditions. We are testing samples in a variety of automotive fluids including: fuels, motor oil, transmission fluid, brake fluid, and ethylene glycol. We have also conducted various thermal cycle and thermal shock tests.
thanks for you introduction, I learned something new from it :-)
good post! thanks for sharing
this is an important introduction for me. thanks!
your blog is very professional, and every visitor can learn something new and useful when they visit this website
Hi I am very interested in it, and want to learn more!
this article is very useful for me, thanks for sharing
Exceptional post however , I was wanting to know if you could write a litte more on this topic?
I’d be very grateful if you could elaborate a little bit further.
Kudos!
Thanks for every other wonderful post. Where else may just anyone get that kind of information in such an ideal method
of writing? I have a presentation next week, and I am at the look for such information.
Quality articles is the key to invite the viewers to pay a quick visit the web page, that’s what this site is providing.
Valuable info. Fortunate me I found your site unintentionally, and I am surprised why this twist
of fate didn’t came about earlier! I bookmarked it.