Mold Assembly is the second step in 3D design
Once the core and cavity have been finalized, work can begin on the remainder of the mold assembly. […]
Core and Cavity Design are the first step in 3D design
Surface modelers still have two general advantages over solid modelers for the first stage of the mold design, the creation of the core and cavity. […]
The history of 3-D mold design
The main methods for creating designs are solid modeling and surface modeling. Surface modeling was the earliest form of CAD. […]
Introduction to 3D design in First rate mold company
First rate mold company with our experience and expertise in 3D technologies can help you in 3D Plastic product design. […]
The fourth Solution to Solve Mold Cracking, Erosion
Cast to the net shape mold blanks–Another effective measure used to extend mold life is the use of cast to net shape tools with their as-cast gating system and cast to net shape mold cavity. […]
The third Solution to Solve Mold Cracking, Erosion
Repair by welding–Permanent molds made of steel exhibit longer life because deteriorated areas may be repaired by conventional welding. […]
The second Solution to Solve Mold Cracking, Erosion
Replaceable in serts–One possible solution may be the use of replaceable inserts that can be put in the sprue well area. […]
The first Solution to Solve Mold Cracking, Erosion
Grind the mold area and create a new sprue well by enlarging the old one- This practice is only a temporary cure yielding mixed results. Though the mold is repaired, […]
What are Water Cooling Concerns?
All water-cooling systems require proper maintenance to ensure the passages do not become clogged with scale from minerals in the water. To combat this issue, […]
Spray or Vaporization Cooling of Permanent Molds
Spray or Vaporization Cooling of Permanent Molds-In this cooling system design,vertical passages in the mold are sprayed with water from nozzles located in the top manifold. […]