Low-volume layered manufacturing (LVLM) is a design-thru-manufacturing method that is already known by many different names in the short time it has been an option for engineers. Whether you call it rapid manufacturing (RM) or direct digital manufacturing, LVLM has the potential to re-define the way products are designed. This technique provides plastic engineers with a method to improve quality, decrease costs and leadtimes.

LVLM is the method of using rapid prototyping (RP) equipment to manufacture end-use parts. RP machines make parts using additive fabrication—meaning the parts are made from the bottom up by adding material to the build space.

This layer-by-layer process virtually eliminates all part design constraints or design rules that exist with traditional manufacturing processes, such as CNC machining and injection molding.

Currently there are three available RP technologies that can manufacture parts suitable for use as end-use parts: fused deposition modeling (FDM®), selective laser sintering (SLS®) and stereolithography (SLA®).

Each production RP technology has its strengths and weaknesses, In order to be viable as a replacement for traditionally manufactured parts, LVLM parts must meet the needs of the application: strong, functional, accurate and appealing. All three current technologies meet those needs. Selecting the best technology for your application depends entirely on your needs.

The Old Way
Traditional methods of design require a good understanding of the constraints imposed by the manufacturing process that will be used to make the parts. For example, parts that will be made by CNC machines must be designed without narrow deep pockets, since the rotating cutter of the CNC machine cannot cut narrow deep pockets. Parts designed to be injection molded must be designed with drafted walls in the direction of the tool movement to enable the part to release from the tool after molding. Injection molded parts must also be designed without undercut or die-locked features. These design-for-manufacturing (DFM) and design-for-assembly (DFA) rules exist to enforce the constraints of the part’s manufacturing process.

A significant challenge to the broad adoption of LVLM techniques is the education of designers in how to design parts and assemblies that take advantage of the design freedoms provided by LVLM.

Design Flexibility
Here is the good news: with LVLM these old way design rules are all thrown out the window. Since the part will be made from the bottom up, layer-by-layer, design constraints are completely eliminated.

The elimination of design constraints enables on demand product flexibility and real-time continuous improvement of products. Since parts made with LVLM have no tooling commitment, they can be improved on the fly, continuously, based on customer or performance feedback. This continuous product improvement leads to higher customer satisfaction and market responsiveness.

LVLM also enables on-demand inventory of the improved design, since the improved units can be manufactured within a few days of conception. With this method, the days of obsolete inventory are gone, since existing designs are made just-in-time, and new, improved parts can be manufactured quickly.

No Penalty for Changes
LVLM cleans up a product manager’s dirtiest word: change. Parts with tooling investment become locked in time and unchangeable, since the cost of re-working the tooling, or worse making new tooling altogether, prohibits the weak part from being changed.

When parts are designed for LVLM, they are not designed for a process that requires expensive, long-leadtime tooling. LVLM makes re-design possible, even encouraged. With no tooling investment, and newfound design freedom, part design can be improved in real-time, with new parts being manufactured in a few days.

LVLM encourages active re-design as learning occurs. Let’s call it active evolution, since the part design, and therefore product performance, can improve with each and every unit shipped. More importantly, active evolution enables you to be laser focused on the needs of your customer.

Focus on Part Consolidation
To take advantage of LVLM effectively, designers must shift their design paradigm to take advantage of part consolidation. Simply put, part consolidation is the act of combining several parts in an assembly into a single part that can easily be manufactured using LVLM. Multiple parts currently only exist because of the constraints imposed by the process used to manufacture those parts.

Since LVLM removes those constraints, the designer can consolidate the parts into far fewer parts, which can then only be made using LVLM.Notice that the original design for the wrist consists of three plates, three standoff posts and two adapters for a total of eight parts—not including the screws.

With LVLM, that assembly is combined into a single part, easily made with LVLM, but impossible to make with CNC or molding methods. The benefit? Eight unique parts are reduced to one. Tooling for those eight parts is eliminated. And the bill-of-materials is reduced by seven parts. This illustration effectively shows one of the benefits in using LVLM for part consolidation.

Assemblies as a Single Part

LVLM excels when parts are designed to be manufactured together. This is certainly a new way to think about design-for-assembly. this time look at the hand. Its original design requires separate parts for each finger, palm pads, joint pins and washers. The LVLM version results in a complete single hand part, designed for LVLM, manufactured using

LVLM, and which meets the product requirements (fully functional, accurate, strong).
And the benefits? Fifteen separate parts are reduced to one (inventory reduction). Unique tooling for each of the parts is eliminated (cost reduction, leadtime reduction). Changing the hand on-the-fly to suit customer needs is simple (small hand version, large hand version). This illustration effectively shows the benefits in using LVLM to design assemblies as a single part.

Geometry without Limits
Let’s go ahead and take a closer look at the ability for layer-based manufacturing to produce previously unthinkable geometry. Since a part is being manufactured from the bottom up, nearly all design constraints are removed. In nearly all cases, if you can design the part in a 3-D CAD software, then you can manufacture the part in an RP machine.
Limitations
All manufacturing processes have limitations, and LVLM has its own unique set as well. The most notable limitation in all layer-based manufacturing methods are the capabilities of the materials used to make parts.

RP machines have been making parts for more than 15 years, but only recently have the materials been strong enough to be used in end-use commercial applications. LVLM parts are now available in ABS, medical and food grade ABS, polycarbonate, nylon and epoxy—all with mechanical properties that are on par with production injection molded plastics.

Surface finish is in second place in the limitation race. LVLM parts cannot produce a smooth surface finish comparable to CNC machined or molded parts. LVLM processes also have well established tolerances, based on part size, which are good, but not quite as good as CNC or molded parts.

About First-rate Mold Solution Co. Ltd.
First-rate Mold Solution Co., Ltd. is based in China and engaged in supply of industry design,mold design,mold manufacturing,molding analysis,project management service,Our team has rich experience in the mold industry, We have first-class engineers in the fields of mold design, injection molding, metal stamping, metal die-casting, hot press molding and etc, we are enthusiastic to our industry and sufficiently inquisitive to learn，eternal adherents of leading-edge technologies in industrial design and manufacturing, such as the Mold technology in the United States, Germany mold technology, the mould technology in the United Kingdom, France mould technology,Italy mold technology, Japan mold technology and so on.

About firstratemold.com
our website has a lot of professional knowledge in mold industry in our blog and news section, also we are interested in CAD/CAM/CAE integration technology, such as AUTOCAD,UGNX, PRO/E,CATIA, CIMATRON, SOLIDWORKS, MOLDFLOW and so on,we warmly welcome every professional engineer, every mold maker and all those peoples who are interested in industrial design, mold design, mold manufacturing, injection mold, metal stamping mold, die-casting mold, injection molding,plastic product and other molds for industrial use to our blog and news section,we would like to share with them.