I think at first we need the latest scanning technology, because successful application of five-axis inspection also requires the use of appropriate inspection software/program that supports the use of the new probe for the verification of both geometric and free-form shapes on all major makes of CMM.

The development work required for five-axis inspection on CMMs has benefited from the considerable work undertaken for many years to produce systems for use with portable inspection arms. These devices are capable of multi-axis inspection because of the degrees of articulation in the arm. As a result, the supporting inspection software has always needed the ability to process measurements from probes that are constantly changing their orientation. Similarly, the use of laser scanners on these arms has required software that can handle the large amounts of data generated. Such systems can process the greater volume of measurements taken on CMMs using five-axis inspection.

The development of five-axis inspection software also has used technology initially generated to support five-axis machining. As well as using similar routines to drive the five-axis movement, the new inspection software also has benefited from being able to incorporate proven five-axis simulation and collision detection technology from machining systems. In the same way that computer models of machine tools can be used to simulate the machining process, models of the most common types of CMM have been developed so that the operation of the whole system can be monitored, not just the movement of the probe around the part. This enables the complete inspection sequence to be developed and tested offline on the computer before being run on the CMM. As a result, users can be confident that the inspection routines will operate safely and efficiently—without any risk of collisions that could damage the probe or the part.