the number of molding cycles is up to 500K, used for medium-sized production volume. This is the most frequently used mold class. There is a wide range for selecting mold materials. Additional requirement for this mold class:
1) it is recommended for having detailed design document.
2) the mold base hardness>13.5HRC.
3) the cavity surface ( on both fixed and moving half) hardness>25HRC
I agree with you at all, I will use it as reference
thanks for your definition. it is very important to know it
thanks for your definition
this concept is good for mould cost control
at this kind of production, mold manufacturing requirement is different
Your method of describing everything in this post is really nice,
every one can effortlessly know it, Thanks a lot.
Nice post. I learn something totally new and challenging on websites I stumbleupon everyday.
It’s always interesting to read through articles from other writers and
use something from other web sites.
Howdy! This is my 1st comment here so I just wanted to give a quick shout out and tell you I really enjoy reading your posts.
Can you recommend any other blogs/websites/forums that
deal with the same topics? Thanks a lot!
thanks for your valuable comment, hope you often visit our website, as for any other blogs/websites/forums that
deal with the same topics, because we are always so busy that We seldom go to care about those, maybe google can help you, what do you think？
the blog platform we use is WordPress, we are glad to hear that you are planning to start your own blog in the near future, actually WordPress can meet your requirement.
Hi there would you mind sharing which blog platform you’re working with?
I’m planning to start my own blog in the near future but I’m
having a tough time selecting between BlogEngine/Wordpress/B2evolution and Drupal.
The reason I ask is because your design seems different then most blogs and I’m looking for something unique.
P.S Sorry for being off-topic but I had to ask!