Optimize prescription of plastics to avoid shrink mark
Optimize prescription of plastics and prefer use resins with low shrinkage; reduce dosage of recycled materials; dry the material as much as possible; […]
the fifth principle for deciding on the parting line is easy to machining
the fifth principle for deciding on the parting line is easy to machining. For instance, a slanted parting line and a curved parting line, […]
a technical process of gas-assisted injection molding– Gas dwell
Gas dwell, upon the completion of filling in the mold cavity and on the premises that the gas pressure is preserved, the product should be put aside until it gradually cools to compensate shrinkage of the product due to the cooling of materials. […]
How to Milling Graphite with Inserted Cutters
Most information for turning graphite applies to milling with inserted cutters. Disposable inserts with a 1/64″ or 1/32″ nose radius are most effectively employed for milling graphite. A positive rake insert is recommended. Cutting fluids and/or coolants are not recommended. Adequate and well-maintained fixturing, rigid tool set-up and well-adjusted machine tools always provide superior results. [...]