The power of CAD has not been fully utilized by most companies, which is associated with the skill and experience level of the CAD operators. As the average operator’s skill and experience levels increase, companies will be able to increase the benefits they receive from CAD. […]
“There’s more than one way to skin a cat” applies to more than just the exfoliation of felines; it’s also applicable to mold repairs. Although the goal is always to make an effective repair, often there is more than one way to accomplish it. […]
Following are a few of the applications for which high conductivity copper alloys are a good material choice to consider: […]
To get a clearer picture of the outlook for moldmakers and molders across the country and to identify the challenges facing moldmakers and the strategies of the winners, What was discovered was a general sense that, despite a variety of ongoing challenges, the worst of the recent industry struggles may be over. […]
In every molding operation, there is great pressure on purchasing agents to reduce tooling costs. When looking for a quality hot runner system, it can be extremely difficult to find the best value for your investment. […]
Competitiveness and price pressure in the injection molding industry has influenced many OEMs, molders and mold manufacturers to look for new ways to survive and thrive in their regional and global markets. […]
The design and manufacture of a silicone mold is different from thermoplastic tooling as well: e.g., tolerances, venting, part ejection and the installation of a vacuum system. […]
A continuing trend within the molding business is silicone molding, which is being used in the medical, electronics, packaging and automotive industries. […]
When designing cooling channels for a mold, the mold designer is frequently looking at deep-draw sections of a molded part and attempting to get as much heat as possible out of these areas. They tend to be the hottest of the hot-spots in most molds. […]
Mold cycle time tends to be driven primarily by the length of time it takes to cool the plastic material until the part can be ejected from the mold. The sections of the molded part that take the longest to cool are the hot-spots. […]