Graphite and EDM Performance
EDMing thin ribs is a difficult application. High-speed machining of the elec-trodes has made it possible to fabricate these electrodes from grades that are not capable of maintaining the detail in the cavity. […]
Why we need Thermal Insulation Boards
The rubber, plastics and wood panel industries work with heated tooling when material is pressed directly between hot platens. […]
What will impact hot runner system?
hot runner buying criteria concluded the following: Of greatest importance to the buyer was to purchase a high quality, high performing solution that was well supported in the field, durable and dependable, delivered on time, competitive on price and featured innovative technology. […]
What is Nozzle Heater?
The torpedo system is one of the first hot runner heated nozzles introduced to the moldmaking industry. The concept is simple – a cartridge heater is inserted into a gun-drilled hole running through the center of several flow channels. […]
What is External Heating (Coil Heater)?
Coil heaters have been introduced to the hot runner system – greatly increasing the cycle speed and the quality of the product produced. […]
What is Cartridge Heater?
Cartridge heaters are utilized around the flow channel to ensure uniform temperature. It is important to keep the distance between the heaters and the manifold equal or greater than 1x the diameter of the heating. […]
Modern mold temperature control technology
A new mold temperature control technology has been developed that affects the two most important things in mold cooling: flow rate and temperature. […]
Introduction to Tubular Heating Elements
Tubular heating elements are inserted into a milled slot into the manifold. This allows for a more accurate location of heat at the areas that require the most . […]
How to identify Thermal Insulation Boards
Thermal Load StabilityOxidizing decay of organic components in thermal insulation boards increases with rising temperatures. Continuous thermal load is defined by the temperature at which the application of a particular grade can be technically and economically justified, so that the lifetime will extend to several years. […]
explain the ready to go mold
“I’m a great moldmaker. I know my trade. My company has great people, the best equipment and we can cut anything. […]