What Is Push-Button Automation?
First of all, “push button” means that with only a few clicks a CAM user can produce one or more machining operations. […]
Automation make your job faster and easier
Myth or fact: CAM systems that offer push-button automation tell machinists how to program their parts. If you said it’s a myth you’re absolutely right. It’s actually the other way around. In an automated CAM system, the programmer dictates to the system how parts are to be machined. […]
Some considerations when it comes to the post-processor
1) Look for software developers who offer post-processors that are certified by machine tool manufacturers to optimize your manufacturing costs and times. […]
Make sure CAD/CAM system is suitable for your company
Have your provider put a clause in your contract that makes this clear. They should be able to create test files made with the software for your equipment and have you run it before you take delivery or install. […]
Introduction to Heat Shrinking Technology
toolholding system to note is heat shrinking technology. This technology is based on heating up and cooling down a toolholder through induction technology. […]
Introduction to Universal Toolholders
toolholding system to be discussed are universal toolholders. With two choices available—one for light-duty applications and one for medium- to heavy-duty applications—users have the possibility to gain the very important advantage of vibration damping for improved tool life and workpiece surface finish at a price point competitive with most high-end colleted toolholder systems. [...]
Introduction to toolholders for Polygonal Clamping
The polygonal clamping system is one of those highly engineered devices that is surprisingly simple: a ground polygon-shaped bore rigidly clamps a cutting tool in three places.For high-speed applications, polygonal clamping is a great solution since the clamping of the tool shank is done by the elastic deformation of the holder. The main advantage of [...]
Introduction to Hydraulic Toolholders
Special toolholding solutions are applied for particular customer solutions. There is one toolholder that can be applied for most of the applications—a hydraulic toolholder. A hydraulic toolholder uses a different way of clamping the cutting tool compared to systems of conventional toolholders. Introduction of force is done via a screw (with a screw, a piston [...]
We should consider Balance in high-speed machine
With machine tool capability a given, and the proper choice of cutting tool and toolholder being made, HSM is a snap, right? Not exactly. Particular focus must be given to the assembly of tool and holder. […]
Toolholding is very important in High-speed machine
Cutting tool challenges such as the ability to avoid chatter, deflection and minimize runout are equally determined by the rigidity, concentricity and balance of the toolholder. There are numerous choices for toolholding, and no one set answer for all applications. Among these are collet style, those that use a (arbor) set-screw, hydraulic holders and of [...]