Introduction to CNC plasma cutting
CNC plasma cutting uses high velocity high temperature ionized gas along with an arc, to cut different types of materials under computer control. […]
Laser Processing Industry In The Mold Of The Application
With the development of science and technology and social needs of the diversification of products more competitive, the replacement cycle is becoming shorter and shorter. To that end, not only in accordance with the requirements of the market as soon as possible to design new products, […]
introduction to Laser Cutting
LASER stands for Light Amplification by Stimulated Emission of Radiation. In laser cutting, sheets of materials are cut by using a beam of high intensity light, so high that it vaporizes the material at the cutting line. The laser beam is moved optically keeping the sheet fixed or the laser beam is fixed and the [...]
introduction to CNC Water Jet Cutting
CNC water jet cutting produces part shapes by cutting sheet material using a high pressure stream of water containing small abrasive particles. […]
introduction to CNC Bending
CNC is the abbreviation for ‘computer numerical control. It is a computer control technique that drives machine tools to fabricate metal components. […]
Define surface roughness
Surface roughness is the measure if the finer surface irregularities in the surface texture. These are the result of the manufacturing process employed to create the surface. Surface roughness Ra is rated as the arithmetic average deviation of the surface valleys and peaks expressed in microinches or micrometers. ISO standards use the term CLA (Center [...]
What is Clamping unit?
Prior to the injection of the molten plastic into the mold, the two halves of the mold must first be securely closed by the clamping unit. When the mold is attached to the injection molding machine, each half is fixed to a large plate, called a platen. […]
What is Injection unit?
The injection unit is responsible for both heating and injecting the material into the mold. The first part of this unit is the hopper, a large container into which the raw plastic is poured. The hopper has an open bottom, which allows the material to feed into the barrel. […]
More details about mold design
In addition to runners and gates, there are many other design issues that must be considered in the design of the molds. Firstly, the mold must allow the molten plastic to flow easily into all of the cavities. […]
Introduction to mold channels
In order for the molten plastic to flow into the mold cavities, several channels are integrated into the mold design. First, the molten plastic enters the mold through the sprue. […]