How to choose Consumables for EDMS
EDMs require several consumables to ensure top performance. These include power feeders, filters and resin. […]
Do a good cleanliness for EDM
The more often a machine is cleaned, the easier and quicker it is to maintain. Failure to wipe down machine areas regularly will result in build up and will require significant time and energy to restore. Be careful when choosing your cleaners; […]
What is Photopolymer Jetting (PolyJet)?
Photopolymer jetting (or PolyJet) builds prototypes by jetting liquid photopolymer resin from ink-jet style heads. The resin is sprayed from the moving heads, […]
What is Fused Deposition Modeling (FDM)?
FDM liquefies solid thermoplastic and extrudes it through nozzles not much thicker than a human hair. Each layer of plastic fuses to the previous one and is immediately solidified. […]
We should make Prototypes before making new products
Whatever the item a company intends to produce, creating a prototype is crucial to the design process. Moldmakers would be wise to stay on top of technology developments and consider their use to improve the service they provide. Following are four reasons why prototyping is important. […]
How to do Robotic automation
Robotic automation is one of the solutions that can improve efficiency of manufacturing. As production requirements increase, robots can be used to efficiently tend existing machines for medium and large lifetime production volumes. […]
What is DFMA Software?
Design for manufacture and assembly (DFMA) is a term often used, but its true meaning and value may have been lost. DFMA is a set of core values combined with a systematic approach for reducing design complexity and cost. These core values include optimizing all areas of the manufacturing process: fabrication, assembly, test, procurement, shipping, [...]
How to understand integration of CAD/CAM
The closer integration of the two technologies offers obvious advantages to smaller manufacturers of simpler parts, where the product designer will often also be the machine tool programmer. Having a common interface for the CAD and CAM software makes learning the two programs easier, while automatic updating of the toolpaths if the design changes will [...]
understand Design software and Manufacture software
It is somewhat ironic that software companies are promoting closer integration when an increasing number of toolmakers are separating design and manufacture by putting responsibility for CAM onto the shop floor. This approach gives a number of potential advantages. […]
CAD/CAM/CAE integration will increase of efficiency
A new approach involving integrating flow simulation software with CAD/CAM software will be discussed in this article. We will show how CAD/CAM/CAE integration reduces the time and effort in running a flow simulation . Flow simulation software products have had limited modeling capabilities and no machining capabilities. […]