What is AS 9100?
AS 9100 is an expanded, international version of AS 9000, a standard which defines quality system requirements for suppliers to the aerospace industry. […]
What is AS 9000?
AS 9000 defines quality management system (QMS) requirements for suppliers to the aerospace industry. […]
What are the Mold Release Problems?
Mold release problems: demands in mold design, cosmetic value requirements and the type of material used in fabrication. Strangely, […]
an injection mold is expensive
Injection molds are made up of special, high quality materials that have a good machinability property. Some standard mold components such as springs, bolts, […]
Introduction to The basic structure of injection mold
This will describe the structure of 2-plate, 3-plate, and runnerless molds.The basic structure of injection mold is determined by the geometry of the product, […]
The checklist of injection mold design
This checklist can be used as a general reference guide for injection mold design engineers. […]
The process of designing mold cavity and core
The old fashioned way but still being used by some mold manufacturers. Designing a mold cavity and core in 2D. Some mold designers may use different procedure. […]
Guidelines for setting the correct mold temperature
molds are becoming more and more complex, and as a result it is getting ever more difficult to create the proper conditions for effective mould temperature control. Except in the case of simple parts, […]
More details about cooling devices
Cooling of large cores For large core diameters (40 mm and larger), a positive transport of coolant must be ensured. This can be done with inserts in which the coolant reaches the tip of the core through a central bore and is led through a spiral to its circumference, […]
Introduction to the cooling device of mold
For areas in the mold where it is not possible to use normal drilled cooling channels, alternative methods must be employed to ensure these areas are uniformly cooled with the rest of the part. […]