Something the mold designer must know
Mold in the position of industrial manufacturing is very important, as a mold designer must master the relevant professional knowledge, some of the knowledge must be mastered： […]
The lamp mold design is not easy
The headlight housing is part of the headlight base and wiring harness before installation. It belongs to the internal functional components, and the external components have many assembly dimensions. The lamp holder has high precision and the installation harness has a large size. The lamp mold is part of the headlight lamp cover part, the [...]
Some tips for the mold design of the car door panel
The car door panel is an important part of the automotive interior. It is located on the inside of the door and has four points: front, back, left and right.There are usually two or four doors depending on the car system. These parts are collectively referred to as the door panel series. The car door [...]
The Best Mold Design Solution
The best molding project starts with First-rate mold solution company, If you have your own 3D CAD model and bring it to us, we can customize the injection mold according to your specifications. […]
Mold design process is changing
The success of the mold manufacturer is due to its ability to deliver high quality products in the shortest possible time and at the lowest possible cost. Here are some best practices for mold design that will help you achieve these goals. […]
Venting design in mold design
we can try to visualise the flow of the melt into the cavity form. The material is initially directed down towards the bottom of the part and will then fill the cavity upwards from this point. […]
Ejection in Mold Design
We could eject this part with pins, with a stripper plate or with sleeve ejectors. It is always preferable to avoid pin gating if the options of stripping or sleeve ejection exist, for three reasons: […]
Start a mold design
For a qualified mold designer, how to start a mold design correctly is very important, I think I can share some of my experience： […]
How to review your mold design
Having a proper tool design review and check list can and will save time to market. Here at Oakley, we have an internal tool design team that works across functions by performing design for manufacturability (DFM) throughout the entire process, from sketch and design engineering through CAD.This means when final product CAD is released to [...]
Modern Mold Design And Manufacturing
With the progress of society and the rapid development of industry, users’ requirements for plastic molds have become higher and higher, and the proportion of plastic molds has also increased year by year, […]