The main advantage of having your tool designer involved earlier is the ability to influence the product and processes being developed. This approach results in added value to your services and creates strong ties with your customer as he becomes more reliant on you to oversee his design process. […]
1) Using air blow when machining die steels such as D-2, H-13, P-20 etc., helps prevent thermal cycling by allowing the heat generated from the cut to leave with the chip. Introducing flood coolant to the machining process will result in the heat being induced back into the part and the tool. […]
To be able to approach CAD data translation well, the product you select needs to have robust kernel technology that allows the transfer of data based on known rules and tolerances of each specific CAD system. […]
The best of all worlds, the roller bearing lock is a proven, newly patented combination alignment lock that combines the best features of the tapered, straight and needle bearing locks with additional benefits. […]
Needle Bearing Locks are A relatively new innovation that attempts to address some of the short-comings of the standard straight lock design, specifically initial engagement. […]
Standard Top Locks Like side locks, these provide lock-up location to overcome injection melt pressures with a small degree of engagement protection. Top locks are typically machined on the centerline axis, […]
Standard Side Locks Used to create lock-up location, which helps overcome injection melt pressures. Side locks provide for a small degree of early engagement protection depending on the particular profile. […]
Straight Locks are The most widely used lock in the industry. Designs are virtually identical between all manufacturers with the exception of material, coatings, grease grooves and graphite plugs. […]
Tapered Round Locks Are usually used as locators only. As with tapered bar locks, they do not provide early alignment or protection of cores, […]
Tapered Bar Locks are primarily used to prevent core shift during injection melt. All tapered bar locks typically use a non-locking taper greater than 7 degrees, with most locks using a 10-degree taper per side. […]