A key component in any hot runner system is the nozzle or drop. Nozzles fall into four main categories: torpedo, valve gate, edge gate and multi tip. Edge gate nozzles are used to gate on a part at 90 degrees to the parting line. There are two varieties of such nozzles.

The sealed edge gate is the traditional design, but is limited by its ability to process some resins (e.g., PC). Hot tip edge gates, on the other hand, are able to process a much wider range of resins, but one should pay attention to the design of such products. Some hot tip edge gate designs result in more costly mold construction because they require split cavity blocks to allow for the installation of the nozzle.

When pursuing a hot tip edge gate, ease of tip installation from the parting line should be a major deciding factor. Such nozzles do not require split cavity blocks and offer parting line accessible tips for ease of installation and removal. Also, dummy tips may be installed in place of a standard tip when a cavity needs to be shut down.

Hot runners may be purchased in the form of a bolt-on hot half that directly bolts to the cavity plate. These packages are delivered as pre-assembled and wired assemblies ready to attach to the cavity plate. A hot half greatly reduces the time needed by the moldmaker to complete the final mold assembly; however, all hot halves are not built the same way or offer the same degree of serviceability.

Most hot halves are designed consisting of two plates: the manifold frame/nozzle retainer plate—which houses the manifold and nozzle—and the top clamp plate. Traditionally, nozzles are installed from the back of the nozzle retainer plate and all heater and thermocouple wiring is routed within this plate.

Removal of nozzles for maintenance requires the complete disassembly of the hot half. A more logical and maintenance-friendly approach is to purchase a hot half with front mount nozzles. A hot half of this design has the nozzles installed from the front of the nozzle retainer plate and the wiring is contained in channels machined on the front face of the nozzle retainer plate for ease of accessibility.

The advantage is the easy removal of the nozzle by simply splitting the cavity plate from the hot half thereby exposing the entire nozzle and its wiring. The nozzle can be removed without disassembly of the hot half. In fact, the nozzle may be removed and/or exchanged quickly while the mold is still in the press if steps are taken in the design and build of the mold to latch the cavity plate to the “B” side of the mold.

About First-rate Mold Solution Co. Ltd.
First-rate Mold Solution Co., Ltd. is based in China and engaged in supply of industry design,mold design,mold manufacturing,molding analysis,project management service,Our team has rich experience in the mold industry, We have first-class engineers in the fields of mold design, injection molding, metal stamping, metal die-casting, hot press molding and etc, we are enthusiastic to our industry and sufficiently inquisitive to learn，eternal adherents of leading-edge technologies in industrial design and manufacturing, such as the Mold technology in the United States, Germany mold technology, the mould technology in the United Kingdom, France mould technology,Italy mold technology, Japan mold technology and so on.

About firstratemold.com
our website has a lot of professional knowledge in mold industry in our blog and news section, also we are interested in CAD/CAM/CAE integration technology, such as AUTOCAD,UGNX, PRO/E,CATIA, CIMATRON, SOLIDWORKS, MOLDFLOW and so on,we warmly welcome every professional engineer, every mold maker and all those peoples who are interested in industrial design, mold design, mold manufacturing, injection mold, metal stamping mold, die-casting mold, injection molding,plastic product and other molds for industrial use to our blog and news section,we would like to share with them.