control the time for gas injection molding
as for controlling the time for gas injection, I have more details, premature injection, when the outer layer of fusant has not fully cooled, […]
the technical control of gas-assisted injection molding has it’s own strict requirement
the technical control of gas-assisted injection molding has it’s own strict requirement, 1) the time and pressure for gas injection should be strictly controlled. 2) temperature of the mold should be strictly controlled.
gas-assisted injection molding result in different gloss on product surface
hey! Guy, I do know you are right, but please don’t forget gas-assisted injection molding can result in different gloss on product surfaces with and without gas injected, the defect shall need to be decked or covered with patterns.
the merit of the Gas-assisted injection molding–saving plastic materials
the merit of the Gas-assisted injection molding—saving plastic materials, since gas in the cavity occupies part of the volume, the product shall become thinner and lighter, generally by 20%--40%.
the merit of the Gas-assisted injection molding–short production cycle
the merit of the Gas-assisted injection molding–short production cycle. Owing to the small injection volume of gas-assisted injection molding, […]
the merit of the Gas-assisted injection molding–can be used to mold products with diverse wall-thickness
the merit of the Gas-assisted injection molding--can be used to mold products with diverse wall-thickness. using gas-assisted injection molding can achieve uniform filling for products with diverse wall-thickness and, on the premises
the merit of the Gas-assisted injection molding–high surface quality
the merit of the Gas-assisted injection molding—high surface quality. […]
the merit of the Gas-assisted injection molding–slight warp and distortion of products
the merit of the Gas-assisted injection molding—slight warp and distortion of products. […]
the merit of the Gas-assisted injection molding–low injection pressure and locking force
the merit of the Gas-assisted injection molding—low injection pressure and locking force, thereby reducing cost for equipment, since gas-assisted injection adopts “ underfeeding injection”, […]
a technical process of gas-assisted injection molding– Discharge of gas
Discharge of gas. When the product is cooled until it takes on certain level of rigidity and intensity,, pressure of the gas shall be discharged and recycled, finally open the cavity and eject the product.