Polypropylene is closely connected with polyethylene with respect to raw materials, manufacturing technique as well as properties. The raw materials, i.e. propylene and ethylene, are both contained in a large amount in the decomposing gas of petroleum. […]
Acetone works together with prussic acid to form cyaniding propyl alcohol which is dehydrated with oil of vitriol, the substance is further combined into methacrylates through reaction with alcohol ester, and finally through polymerization with catalyzer, PMMA is thereby got. […]
The aggregation of stryrene monomer,acrylonitrile monomer and butadiene rubber can produce a polymer (ABS) constituted by acrylonitrile ( A ), butadiene rubber ( B ) and styrene ( S ) in various proportions. The characteristic thereof, due to the ingenious combination by the three components, shows such features as high impact resistance, large tensile strength [...]
The composite ethylene gas made from benzene( adopted from coal tar or petroleum) and ethylene gas, is dehydrogenated by metal oxide catalyzer heated to 600 celsius degree into styrene monomer, which is then catalyzed and aggregated into polystryreneresin through such catalyzer as inorgranic peroxide. The polystyrene resin in the market is colorless and transparent, hard [...]
The PVC monomer arises from the reaction between ethyne and hydrochloric acid, and the monomer thereafter is aggregated into PVC through various methods, PVC is devoid of stability against heat and light, and therefore, stabilizers shall be added therein to avoid discoloration or decomposition upon the materials’ being processed into finished products. Various stabilizers are [...]
Increasing the effectiveness of EDM operations does not come solely with technological improvements in the EDM sinker. This is one of many aspects needing to be considered when working to optimize EDM performance and increase productivity. Other areas of consideration include the type of dielectric fluid, tooling and electrode material used in the EDM applications. [...]
Speed, precision and stability are the key attributes of a mold machine. With the increased accuracy demanded by sophisticated molded assemblies, particularly in the automotive supplier industry, mold shaping machine tools are breaking new ground in precision, speed and multi-axis cutting. […]
The U.S. is one of the few countries in the world still designing and building molds to inch standards when the global standard for measurement is metric. By using the inch standard our industry is out of sync with the rest of the world (except Liberia and Burma). This became clear early on in my [...]
For years we have been hearing about the virtues of aluminum molds for injection parts, and First-rate mold company’s Mold Builders has built its fair share—mostly for special-purpose applications that did not require many actions. For smaller molds using specialty aluminum has its benefits; and, if cycle times are critical, you can justify the high [...]
when the temperature is between vitrification temperature and viscous flow temperature, the polymer shall be under highly-elastic state, […]