How to make a successful mold outsourcing in china
When there are many miles between you and your mold builder, consider the following five approaches to ensure the mold is built on time, on budget and at the quality the project deserves. […]
Mold and Tooling are different concepts respectively
When molds and tooling are mentioned, what comes to mind are the parts that are produced through the use of processes like blow molding or injection molding. […]
What kind of plastic product design is qualified？
Uniformity is best. Constant wall thicknesses throughout your part will provide the best flow. Nominal wall thickness should be between 2-3mm. The recommended minimum is 1mm and the maximum is 4mm for conventional injection molding processes. […]
You need an excellent product design
Our competent designers know what questions to ask by providing design recommendations, viable alternatives and practical assistance to assure that the customer’s requested part design or model meets their specifications. […]
How to start an injection molded part project?
These are some of the many questions and considerations that all parties in an injection molded part project must understand and agree upon before starting a job. […]
Optimize your tooling supply chain
When OEMs outsource their parts production to external suppliers, they are dependent on their suppliers to precisely track the number of units that will arrive, quality issues and expected delays. […]
EDM different material at the same
“Can I die sink EDM two different workpiece materials at the same time?” is a frequently asked EDM question, especially in mold manufacturing where tool steels and copper alloys are often involved. […]
Some Injection Mold Design Points
1)Incorrect material selection – The coefficient of thermal expansion for all steel, hardened steels, copper & aluminum, must be taken into consideration when designing and building tools. Large differences can cause damage and uneven wear to all components. […]
Some issues we met in some molds
Some of the issues our team has experienced, and that have caused issues with the mold running, are listed below: […]
Some Plastic Injection Part Design Issues
1) Part designed with incorrect wall thickness – The part should be designed with the thinnest wall section the part can tolerate (taking into account strength, functionality and other critical aspects of the design). The two risks as: […]