About First-rate Mold Solution Co., Ltd. Team

First-rate Mold Solution Co. Ltd is based in China and engaged in supply of industrial design, mold design, molding analysis and project management service.

How to Milling Graphite with Inserted Cutters

Most information for turning graphite applies to milling with inserted cutters. Disposable inserts with a 1/64″ or 1/32″ nose radius are most effectively employed for milling graphite. A positive rake insert is recommended. Cutting fluids and/or coolants are not recommended. Adequate and well-maintained fixturing, rigid tool set-up and well-adjusted machine tools always provide superior results. [...]

By |2014-12-01T02:31:15+08:00January 16th, 2011|Blog|1 Comment

How to Turning and Machining Graphite

Disposable inserts with a 1/64- to 1/32-inch nose radius are most effectively employed for turning graphite. A positive rake insert without a chip control groove is preferred. Cutting fluids and/or coolants are not recommended. Adequate and well-maintained fixturing, rigid tool setup and well-adjusted machine tools always provide superior results. When machining long rods and cylinders, [...]

By |2024-09-19T19:36:40+08:00January 16th, 2011|Blog|2 Comments

Why we need mold repair skill?

There does not seem to be a clear and reasonable distinction between moldmaking and mold repair. Applicants for in-house mold repair shops are quizzed about their moldmaking experience with the obligatory “Do you have any experience doing repair work?” question tagged on. Though mold building and mold repair employ some of the same basic skills, [...]

By |2026-10-24T13:01:51+08:00January 9th, 2011|News|2 Comments

How to do a best surface finishing

The process of surface finishing requires a variety of tools, materials, and most importantly, highly specialized skills. It is an art that takes years of experience to perfect, but some basic principles and techniques can provide a good start. This article will examine the three major processes necessary to produce a highly polished, lustrous metal [...]

By |2024-03-27T09:53:14+08:00January 9th, 2011|News|4 Comments

Introduction to Repair Skills of mold industry

If moldmaking and mold repair are indeed two separate entities the question becomes “What are the specific skill sets required for a mold repair technician?” Unfortunately the answer may be largely influenced by the specific repair environment. That is to say, if the in-house toolroom is fully equipped, the level of repairs may be quite [...]

By |2024-08-19T16:02:46+08:00January 9th, 2011|Blog|4 Comments

How to match customer requirement

In this series we will be discussing executive decision-making and how to improve the process, including things like decision speed, reliability, prioritization and risk reduction. The process and principles we will cover work extremely well for high level/executive decision makers, product development teams and sales/marketing managers. These same principles of truly understanding the needs of [...]

By |2020-07-12T14:56:43+08:00January 9th, 2011|Blog|1 Comment
Go to Top